Can two switches control one ceiling fan?

Can two switches control one ceiling fan?

Wire Your Fan A single wall switch controls the power to the fan and light together, whereas a dual wall switch has two separate switches – one for the fan and the other for the light. You cannot operate a ceiling fan with a wall dimmer switch.

How do you split a light with two switches?

3 Answers

1. Get a 2-gang box to replace your existing 1-gang box.
2. Get a new switch.
3. Remove your existing box and install the 2-gang box in its place.
4. Run your supply hot wire to both switches.
5. Connect the light/fan hot wire to one switch and the exterior light to the other.
6. Join all neutrals and ground wires.

Can ceiling fan work with remote and wall switch?

You can wire a new ceiling fan with a remote to a wall switch or retrofit an older fan to accept an aftermarket remote kit.

Does a remote controlled ceiling fan need a wall switch?

While most ceiling fans are remote control adaptable, meaning a remote can be added if desired, there are some of fans that come with a remote and cannot have a switch installed (i.e. remote only). That way only a single wall switch plate is required which keeps the wall looking cleaner and less cluttered.

Can you use a wall switch with a remote control ceiling fan?

Can a fan and light be on the same switch?

You can run your bathroom fan on the same switch as your lights. It solves other problems, so it’s not a bad idea even if you have two switches. This kind of arrangement isn’t a bad idea anyway.

Can one switch control 2 lights?

You can do this light switch wiring in one of two ways. The most common is to daisy-chain the light fixtures by connecting them to each other and hooking the first one up to the switch. The other way to wire multiple lights to one switch is to connect all of them directly to the switch in a “home run” configuration.

Can a single pole switch control two lights?

A single light switch that controls two fixtures, such as two lights or a light and a bathroom or ceiling fan, can be converted to a double light switch that allows you to operate each fixture independently. You’ll need a screwdriver, a pair of wire strippers, a double switch plate and a voltage tester.

Which wire controls the fan on the light switch?

This way the remote module will control the fan (when the switch is in the ON position), and the other switch will control the light. This answer assumes the black wire controls the fan, while the blue controls the light kit on the fan.

How do I connect a ceiling fan to a wall switch?

If you want direct control of the light and fan from the wall switches, you can usually skip the controller unit in the fan unit, but you lose control of speed and light level. Based on further feedback from the OP, connect the black wire in the ceiling box to the black wire on the remote unit in the fan.

How to wire a single wall fan with no control?

Single Wall Switch Wiring 1 Standard Pull Chain fan (no control) Connect the three grounding wires (green, green/yellow stripe, or bare copper) coming from the ceiling fan-rated electrical box, the downrod attached to your fan, 2 Integrated Control. 3 Canopy Mounted Control.

What is the difference between a single wall switch and dual?

A single wall switch controls the power to the fan and light together, whereas a dual wall switch has two separate switches – one for the fan and the other for the light. NOTE: An existing wall dimmer switch must be replaced with a single ON/OFF wall switch before installing a Hunter Fan to ensure consistent power flow from the switch to the fan.