Do boat trailers have suspension?
Many boat trailers have leaf-spring suspension systems to cushion the ride, but these don’t damp the bouncing motion. On the other hand, many boat trailers now use torsion axles because these reduce bouncing and allow the boat to ride lower for more stability.
How long do boat trailer leaf springs last?
Regular boat trailer leaf springs last two or three years on average. **Remember, when upgrading to torsion axles from leaf springs, plan on raising your boat trailer fenders up a few inches to give your trailer tires the clearance they need.
How do slipper leaf springs work?
Slipper springs have an eye on the front of the spring and an arched open end on the rear, allowing the spring to “slip” on the equalizer or rear hanger.
Does a trailer need suspension?
How many commercially-built trailers out there do you see that are built without suspension of some sort. The short answer is – NONE. The exception to this is tow dollies, because when loaded, the front suspension of the towed vehicle is the suspension.
How do you make a boat trailer easier to load a boat?
57 second clip suggested6:55Loading Your Boat Easily (Avoid The #1 Mistake) – YouTubeYouTube
How do I know if my trailer springs need replacing?
Trailer springs should always be inspected for cracks and breakage to avoid failure of the trailer spring. Cracks typically appear near the philister bolt and near the eye of the bolt that connects your spring to your hanger. Anytime you see a crack or break in the spring it is time to replace them.
How do I protect my boat trailer springs?
The common methods of water repellant coatings are spraying the leaf springs with a water-repelling lubricant and coating the leaf springs with a suitable type of grease after at least every 3-4 uses. Spray lubricants are easy to apply, but are not very durable, so the coating will need to be applied regularly.
Do trailer torsion axles wear out?
Helpful Expert Reply: It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle.
Is Slipper suspension good?
Slipper springs provide an effective and durable suspension system, and are suitable for both single axle and tandem axle trailers with an ATM up to 1,990 kg.
Should you grease slipper springs?
Re: A Question About Slipper Springs…. Greasing the slippers is simply out of the frying pan and into the fire re attracting sand and grit, but perhaps an annual application of powdered graphite (as you use in lock barrels) would help calm the nerves of some.
Do you have suspension parts for boat trailers?
We also have weld-on suspension components which are perfectly adequate for Boat Trailers in freshwater environments. Of Course a little cross-over is not uncommon. Suspension Parts are very specific to the Type of Leaf Spring you have on your boat Trailer.
Where can I buy trailer axle suspension kits?
Trailer Parts Superstore® sells Trailer Axle Suspension Kits to mount most trailer axles up to 8k capacity. We offer multiple kits with a variety of different options as it pertains to contents of the kit and type of leaf springs to be used.
Can you replace a leaf spring on a boat trailer?
Suspension Parts are very specific to the Type of Leaf Spring you have on your boat Trailer. For direct replacements of parts be sure to check and double check measurements to ensure a proper replacement. Stainless Steel does not rust! Leaf Spring for your Utility or Boat Trailer!
Can you use galvanized bolts on a boat trailer?
All Galvanized components are ideal for saltwater and freshwater use. The Raw Steel Components are typically used on Steel Trailers, like bass boat or pontoon boat trailers. Most of these parts are commonly replaced when also replacing leaf springs and spring bolts on your axle.