Does the X32 rack need a router?

All you need is a good Router and it doesn’t need to be connected to the internet.

How do I connect my X32 to WiFi?

Connect to the X32-Mix App

On the iPad, go to Settings and select WiFi.
Select the Wifi Network the X32 is connected to.
Open XiControl and enter the IP address when prompted.
Press Connect and then tab outside of the Setup screen.

How do I connect my Behringer X32 mixer to my computer?

X32 USB recording

Connect the X32 to your computer via USB. Windows users will first need to install the latest driver available from Behringer.
Launch your DAW and select the X32 as the audio input/output device.
Create tracks in your DAW and assign each input to the correct input channel.

Does Behringer X32 have Bluetooth?

Obvious”, but it is easy to add Bluetooth streaming to most of the X32 mixers. It is easy to add Bluetooth capability. There are dozens of Bluetooth streaming devices out there ranging from $20 to about $75. They generally have a 1/8″ stereo plug.

How do I access my router web page?

Find Your Router’s IP Address You log into your router’s firmware through a browser. Any browser will do. At the address field, type the IP address of your router. Most routers use an address of 192.168.1.1.

How do I connect my Behringer X32 to my laptop?

Recording X32 to a computer

Connect the X32 to your computer via USB. Windows users will first need to install the latest driver available from Behringer.
Launch your DAW and select the X32 as the audio input/output device.
Create tracks in your DAW and assign each input to the correct input channel.

What router are you using with the x32?

Console IP Address: 192.168.1.2

Subnet Mask: 255.255.255.0

Router IP Address: 192.168.1.1

How do I setup X32 edit with my Behringer X32?

Plug an ethernet cable into an open LAN port on the wireless router and the X32’s Ethernet port.

On your wireless router’s setup screen,write down the router’s IP address and then select an IP address from the DHCP IP Address Range given.

On the X32,press Setup and go to the Network tab.

How to update the firmware on the Behringer X32?

Go to the Behringer downloads page and download your X32 firmware: Select the Mixers Category Select the Digital Sub-Category Select your X32 model for Product.

Go to your Downloads folder and double-click the X32 firmware folder.

Copy the firmware file to a root directory USB stick.

Insert the USB stick to the X32’s USB port and power on the mixer.

How do I setup my X32 with my iPad?

iPad Configuration 1. Download the Xi Control app for free from the Apple App Store. 2. Connect the X32 “Ethernet” jack to an available port on a wireless router (NOT the WAN / Internet port). 3. On your iPad, open the Wi-Fi settings and connect to the wireless router. 4. Launch Xi Control and take note of the IP address of your iPad.