How do I access my PTCL router settings?

How do I access my PTCL router settings?

Open web browser and type “192.168. 10.1” to get the access of the modem. Following window will pop up; input user name “admin” and password in printed at sticker on the bottom panel of modem(default password is last 5 digits of MAC address).

How can I fix PTCL broadband connection?

So, first, start with the router.

1. Check that your Modem wire is plugged correctly in both the Router and Modem.
2. Make sure that modem should not be placed near heavy electricity instruments like monitors, speakers, etc.
3. Reset your router to flush the internet packets and then try again.

Can we use PTCL modem as WiFi router?

PTCL Modem as a Wifi Router: Most of them don’t want to buy an extra TP-link router so you can convert you PTCL modem as a WiFi router.

What is PTCL admin password?

You need to type username and password of your PTCL modem. Most of the times, the default username is “admin” and also the password is “admin”.

How do I change my 192.168 10.1 password?

Configure Your Router With 192.168. 10.1

1. Go to the general settings menu.
2. Choose the router password or similarly-named option.
3. Enter your desired password.
4. Save the changes.

Why is the DSL light not on?

If the DSL light on your modem remains off, blinking, or red after a few minutes, there may be an issue with the network. Try rebooting your modem. If you have another phone jack in the house connected to your internet line, try connecting the modem to the other phone jack, in case the jack is faulty.

How do you turn on a DSL Light?

If the DSL light is still off, disconnect the power cable, wait a few moments, reconnect the power cable and wait a few more minutes for the Power light to switch on. If the modem’s DSL light is still off, restart your Fibre Hub. Press and release the Reset button on the back of the Fibre Hub.

How do I configure my modem router?

Power on your router and computer first and then modem.

1. Log into the router’s web-based management page.
2. Configure WAN Connection Type.
3. Enter your PPPoE username and password which are provided by your ISP.
4. Click Save to save your settings, then the router will connect to Internet after a while.

How do I make my DSL modem into a wireless router?

Connect your network cable in any of the LAN port. Connect your computer to another LAN port of the modem. Now check your default gateway of the modem using ipconfig Command in CMD. Now open your browser and put default gateway in the address bar.

How can I access my PTCL router without password?

What can I do if I forget the login username/password of my DSL modem/router?

1. Step 1 Turn off the router.
2. Step 2 Press and hold the reset button on the rear panel with a pin, then turn on the router.
3. Step 3 Release the reset button and wait for the device to reboot.
4. Note:

How do I log into my 192.168 1.1 router?

How to Login 192.168. 1.1?

1. Turn on your router and connect it to your computer with an Ethernet cable.
2. Open your favorite web browser and type “http://192.168.1.1” into the address bar.
3. Enter the correct router login/password combination.