How do I find the VLAN details on my HP switch?

How do I find the VLAN details on my HP switch?

Specifies a single port number or a range of ports (for example, a1-a16 ) , or all for which to display information. Displays detailed VLAN membership information on a per-port basis….Syntax:

Port name The user-specified port name, if one has been assigned.
VLAN ID The VLAN identification number, or VID.

How do I find the VLAN port?

Use the show vlan command to verify your VLAN configuration. This command displays all switchports and their associated VLAN as well as the VLAN status and some extra parameters that relate to Token Ring and FDDI trunks.

How do I check the VLAN on my extreme switch?

Answer

  1. Type show port status (port string) Verify the port has a link as you will not see vlan status until the port has active link.
  2. Type show vlan portinfo port {port string}
  3. Type show vlan static {vlan id} This command will show port vlan settings even if there is no link.

How do I check my ports on my HP switch?

To check the mode setting for a port on the switch, use either the Port Status screen in the menu interface or show interfaces brief in the CLI (see Viewing port status and configuration (CLI)).

How do I add a port to a VLAN on a HP ProCurve?

To assign an access port (in interface view) or multiple access ports (in port group view) to a VLAN:

  1. Enter system view, use the command: system view.
  2. Enter interface view or port group view. Enter Layer 2 Ethernet interface view.
  3. Configure the link type of the ports as access.
  4. Assign the access ports to a VLAN.

What is show VLAN brief?

The show vlans command lists the VLANs currently running in the switch, with VID, VLAN name and VLAN status. Dynamic VLANs appear only if the switch is running with GVRP enabled and one or more ports has dynamically joined an advertised VLAN. In the default configuration, GVRP is disabled.

How do I find my VLAN on a server?

To find your VLAN (on a Windows XP machine), go to “Start Menu”,then click the return (enter) key on your keyboard. This runs a command prompt. Type in “ipconfig” and hit return again. You will see your IP Address, your Subnet Mask and your Default Gateway.

What is primary VLAN in HP Procurve?

The primary VLAN is the VLAN the switch uses to run and manage these features and data. In the factory-default configuration, the switch designates the default VLAN (DEFAULT_VLAN) as the primary VLAN. However, to provide more control in your network, you can designate another VLAN as primary.

How do I turn off the port on my HP Procurve switch?

Details

  1. To disable a port on the HP V1810 switch, open the web GUI interface and select Switching, Port Configuration.
  2. On the Port Configuration screen, there is an option for Admin Mode which allows a port to be disabled or enabled.

How can I check port status?

Checking the Status of a Port

  1. Click on the Start Menu and in the search bar, type ‘cmd’, and press Enter.
  2. OR press Windows Key + R to open the Run Prompt. Type ‘cmd’, then click OK (or press Enter)

How do I create a VLAN on a HP ProCurve switch?

To create a VLAN on a HP Procurve switch – connect to the device using putty and enter privileged mode (see “ Connecting to a HP ProCurve Switch Using a Console cable & Putty “) 1. To see what VLANS currently exist on the switch, In privileged mode issue

How do I use the show VLANs command?

The show vlans command lists this data when GVRP is enabled and at least one port on the switch has dynamically joined the designated VLAN. Specifies the order you want information to display for the show vlans command. Displays information for one port or a range of ports. If is not specified, all ports display.

How to autocomplete VLANs ports?

For example, if you typed “show vlans ports 1” and hit the tab key twice, you will see that there are two options: detail or . In Comware, you can do the same thing with the tab key to autocomplete and then use the question mark key to see available options.

How do I display the VLAN configuration of a Cisco switch?

Displaying a switch VLAN configuration. The show vlans command lists the VLANs currently running in the switch, with VID, VLAN name and VLAN status. Dynamic VLANs appear only if the switch is running with GVRP enabled and one or more ports has dynamically joined an advertised VLAN. In the default configuration, GVRP is disabled.