How do I identify a GM 5 speed manual transmission?

How do I identify a GM 5 speed manual transmission?

This 5-speed is based on the T4 Design. Aluminum case with top cover, internal single-rail shift with the shifter mounted on the extension housing. Casting numbers on the case, cover or extension housing are 13-51 or 13-52. 5th gear (overdrive) is located at the rear of the transmission in the extension housing.

How do I identify a NV3500 transmission?

How to Identify a NV3500 Transmission

  1. Check the shift rail on the transmission. This particular transmission has a single shift rail, instead of a rail for each gear.
  2. Look at the body of the transmission. It has a front half and a back half.
  3. Locate the plugs.
  4. Look at the overall shape of the transmission.

What kind of manual transmission is in a 1995 Chevy 1500 5 speed?

RMT4500C-4 – NV4500 Manual Transmission for GM 1994-1995 Pickup 4×4 5 Speed.

How do I know if my transmission is 5LM60?

On HM290/5LM60/NV3500 transmissions, the bell housing is integral to the to the aluminum-casting and the case has a waffle pattern after the bell housing, towards the rear of the vehicle. The NV4500 is a top-loading, cast-iron, heavy-duty transmission with an aluminum shift cover.

How do I know what GM transmission I have?

The easiest method of GM automatic transmission identification is to examine the transmission pan. New transmission designs came with new, unique pan shapes, and the general shape of the pan often paints a fairly clear picture of which automatic transmission you are dealing with.

How can I tell if I have a NV3500 or nv4500?

Thus, the quick way to ID which transmission you’re dealing with is to note whether the bellhousing is a separate piece (4500) or integrated (3500). In addition, the lighter-duty 3500’s case/bellhousing is all aluminum, whereas the heavy duty 4500 uses an aluminum bellhousing but a cast iron transmission case.

Will a 350 bolt up to a NV3500?

Registered. A NV3500 is good to about 300 ft lbs of torque, the vortec 350 makes around 325. You should be alright the factory rates the transmission at a lower rating, I would say they are good to about 375 and thats if it gets a good hook on some big meats.

What is the difference between nv3500 and NV4500?

The 4500 unit is much stronger than the 3500 unit, with beefed up internals and the iron case. The 4500 tended to be used in Heavy Duty (3/4 and 1-ton) trucks, whereas the 3500 unit tended to be used in 1/2-ton trucks.

Is the NV4500 a good transmission?

The NV4500 transmission is considered to be the toughest and most reliable 5 speed manual transmission ever built. Robust and reliable, this 5 speed transmission was supplied in pickup trucks (up to 1 Ton) and is a popular replacement in older trucks with 4 speeds.

How can you tell the difference between NV4500 and NV3500?

Will a 5.3 bolt up to a NV3500?

There are a couple guys who are. They bolt up just fine and can use the 4.8/5.3 NV3500 flywheel/clutch setup from my understanding. Try a search if you want to really dig into the details.