How do I identify my Honda engine?

How do I identify my Honda engine?

Finding the Engine Model To find the model number, look for a model number sticker on the engine. All Honda engines model numbers start with the letter “G,” such as “G100”, “GX610”, or “GXV160.” This is the base engine model. The engine model and serial number should be adequate for most of your needs.

How many horsepower is a Honda GX690?

22.1 hp

GX630 GX690
Engine Type Air-cooled 4-stroke OHV Air-cooled 4-stroke OHV
Bore x Stroke 78 X 72 mm 78 X 72 mm
Displacement 688 cm3 688 cm3
Net Power Output* 20.8 hp (15.5 kW) @ 3,600 rpm 22.1 hp (16.5 kW) @ 3,600 rpm

How many cc is a 24 HP Honda engine?

670 cc. Shaft Tapered 30mm to 27mm x 1-3.8″ long, no keyway, tapped end M10-1.25.

Where are Honda gcv160 engines made?

Moreover, the Kumamoto Factory, where the all-new GCV Series engines will be produced, adopted an automated assembly line for GCV engines that utilizes know-how Honda has amassed through the production of motorcycles, which makes possible high-efficiency and high-quality engine production.

How do I find out what engine I have?

Find it in the lower corner of your windshield on the driver’s side. Your VIN number is your vehicle identification number and you can find your engine size by VIN number. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine codes.

How do I read my Honda engine number?

Finding the Engine Serial Number The engine serial number is stamped into the side of the engine. All Honda engine serial numbers have a 4 or 5 letter prefix followed by a 7 digit number.

Where is the Honda GX690 made?

GX690 RH BAF (GCAPH) – Honda Engine, Made in China (SN: GCAPH-1000001 – GCAPH-1999999)

How many cc is a 22 hp engine?

22 HP (670cc) V-Twin Horizontal Shaft Gas Engine, EPA.

How many horsepower is 688cc?


GXV630 GXV660
Displacement 688 cm3 688 cm3
Net Power Output* 20.8 hp (15.5 kW) @ 3,600 rpm 21.5 hp (16.0 kW) @ 3,600 rpm
Net Torque 35.6 lbs ft (48.3 Nm) @ 2,500 rpm 35.6 lbs ft (48.3 Nm) @ 2,500 rpm
PTO Shaft Rotation Counterclockwise (from PTO shaft side) Counterclockwise (from PTO shaft side)

Does Honda make f1 engines?

Honda has participated in Formula One, as an engine manufacturer and team owner, for various periods since 1964. Honda’s involvement in Formula One began with the 1964 season, and in 1965 they achieved their first victory at the Mexican Grand Prix.

Are Honda engines made in China?

Honda also produces an equal amount of engines in China through its Dongfeng Honda Engine joint venture operation. Dongfeng Honda Automobile Co., Ltd. began production of the CR-V in April 2004. Annual production capacity is at 30,000 units, increasing to 120,000 units by early 2006 with introduction of the new Civic.