How do I remove the Compaq la2306x monitor stand?

How do I remove the Compaq la2306x monitor stand?

1. Removing the Monitor Pedestal Base.
2. NOTE:
3. CAUTION:
4. Disconnect and remove the signal, power, and USB cables from the monitor.
5. Lay the monitor face down on a flat surface covered by a clean, dry cloth.
6. Pivot the base 45 degrees clockwise and remove the screw from the back of the monitor, then.
7. Figure 2-16.

How do you open a HP monitor?

1. Press the power button on the computer to turn it on. 2. Press the power button under the right side of the bezel on the monitor to turn it on.

How do I turn on my HP Compaq la2306x?

Press the power button on the computer to turn it on. 2. Press the power button on the front of the monitor to turn it on.

How do I take apart my LCD monitor?

No parts specified.

1. Step 1 Preparation. Unplug your monitor.
2. Step 2 Remove screws in IO panel. There are 3 Phillips screws in IO panel.
3. Step 3 Remove stand base.
4. Step 4 Remove stand stem.
5. Step 5 Remove tilting mechanism.
6. Step 6 Remove the monitor’s back.
7. Step 7 Disconnect control panel.
8. Step 8 Remove monitor’s plastic frame.

What is swivel adjustment monitor?

Adjust the viewing angle left and right as shown in the illustration. Adjust the viewing angle left and right as shown in the illustration. Swivel is available depending on the TV size. When adjusting the angle, hold the stand with one hand to avoid having the stand slip or tip over.

How do I remove the stand from my Thinkvision monitor?

Hold the sides of your computer and gently lay it down so that the screen is against the surface and the cover is facing up. Remove the two rubber blocks 1 that protect the screws 2 . Carefully loosen the two screws 2 that secure the monitor stand. Then, lift the monitor stand up to remove it from the computer.

Does HP Compaq la2306x have speakers?

Cons: No speakers.

What is the screen size of the la2306x?

● LA2306x model, 58.4 cm (23-inch) diagonal viewable area display with 1920 x 1080 resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum

How do I remove the stand from my TV?

– Gently lay the TV screenside down on the cloth, then using the screwdriver loosen and remove all four screws. – Slowly pull the stand out of the bottom of the TV.

What are the dimensions of the enww la2306x table A-4?

23 inches wide screen Viewable Image Size 58.42 cm diagonal 23–inch diagonal ENWW LA2306x Model 23 Table A-4 LA2306x Specifications (continued) Tilt -5 to 30° Swivel -180 to 180° Maximum Weight (Unpacked) 6.8 kg 15.0 lbs Dimensions (include base) Height (highest position) Height (lowest position) Depth Width 46.62 cm 35.11 cm 24.95 cm 55.15 cm

What are the dimensions of the la1956x display?

● LA1956x model, 48.3 cm (19–inch) diagonal viewable area display with 1280 x 1024 resolution, plus full-screen support for lower resolutions: includes custom scaling for maximum