How do I restore a Cisco 2960 to factory settings?

Reset a Cisco 2960 Switch to Factory Default Settings

– Start by connecting your cisco switch via a console cable that will be also connected to the same console.
Step 2.- Use the following commands: Router: en. Router#erase startup-config. Router# del flash:vlan.dat.
– Reload your cisco switch to complete the restoration.

How do I restore a Cisco switch to factory settings?

Reset the switch to factory defaults:

Erase the existing configuration: write erase.
Reload the switch software: reload.
In the configuration wizard, enter the basic switch settings: Admin password.
When prompted, enter the user name and password to log in to the switch.

How do I wipe a Cisco switch?

Hold the “mode” button on the front of the switch for 10 seconds. The lights will blink then go solid – the switch completely wipes all configuration and then reboots.

How do I factory reset my Cisco router?

Prepare the router. Make sure the Cisco router is turned off and the power cord is plugged into both the router and the power source.
Locate the reset button. Look for the small factory reset button on the back of the router.
Use the reset button.
Wait for the reset to complete.

What is the default IP for Cisco 2960 switch?

The switch has a default IP address “10.0. 0.1” and a secondary IP address “10.0. 0.3”.

What is the default password for Cisco 2960 switch?

cisco
The other device is turned on. and press Enter. When prompted, enter the default password, cisco. username field.

Why is it necessary to erase the startup configuration?

Why is it necessary to erase the startup configuration before reloading the router? The startup configuration file is loaded into memory and becomes the running-config after the router reloads. Erasing this file allows the router to return to its basic configuration after a reload.

How do I Reset my Cisco Catalyst 2950 to factory settings?

Reset a switch running Cisco IOS Software to factory defaults

Enter “enable” mode by typing:
The console prompt should change from “switch>” to “switch#” to signify this.
To reset the switch to factory default, issue the erase startup-config or write erase command.

How do I reset my Cisco rv340 router?

To reset the router to factory default settings, press and hold the reset button for 10 seconds.

How do I reset my Cisco router to factory settings without a password?

How to: Resetting a Cisco Switch to Default & Password Recovery

Step 1: Connect the console cable to your PC.
Step 2: Verify that it is a console cable.
Step 3: Download Putty and Start a Serial Connection.
Step 4: Double Check Serial Settings.
Step 5: Plug in the Console cable.

How to reset Cisco IP phone to the factory default?

Objective. Resetting the Cisco IP Phone 7800 Series and Cisco IP Phone 8800 Series to default setting lets you revert all the settings of the phone to factory default settings.

Applicable Devices

Factory Reset the IP Phone from the Phone Menu. Press the Applications button on the front of the phone.

Reset the IP Phone Using the Keypad.

How to reset Cisco switch to factory settings?

Enter the config-register 0x2142 command in global configuration mode.

Reload the router using the reload command in enable mode.

Enter no to the question “Would you like to enter initial configuration dialog?”

Change the configuration register setting to 0x2102 by entering the config-register 0x2102 command once in global configuration mode.

How to upgrade Cisco IOS on 2960 switch?

Ensure that the switch has a route to the TFTP server.

Ensure that the image to be downloaded is in the correct directory on the TFTP server (usually/tftpboot on a UNIX workstation).

For download operations,ensure that the permissions on the file are set correctly.

How do you factory reset a Cisco router?

How do I manually reset my Cisco router? Reset Router Using Reset Button. With the router powered off, connect the power cord to your router, and plug the power cord into your power source. Find the Reset button on the router. Press and hold the Reset button while you power on the router. Release the Reset button after 10 seconds.