How do I set my Trane thermostat to manual?

How do I set my Trane thermostat to manual?

Manual Control

  1. Step 1: Press and hold the ‘System Mode’ button.
  2. Step 2: To set the input temperature setting, all you have to do is push the up or down buttons.
  3. Step 3: If you wish to override the manual temperature, Press the Hold button on the thermostat.

Why is my manual thermostat not working?

There simply may not be any power going to your thermostat. This could be caused by a poor connection, blown fuse, dead batteries, or a tripped circuit breaker. If all of these areas look good and your unit should be receiving power, the issue lies elsewhere.

How do I know if my Trane thermostat is bad?

Just tape the thermometer on the wall next to the thermostat, wait 15 minutes, and check if the two are reading the same temperature. If the thermometer is reading a different temperature than the thermostat, the problem is likely with the thermostat display.

How do I know which Trane thermostat I have?

Finding the model number of a thermostat is easy. It should be printed on the back of the face-plate.

How do you reset a Trane thermostat?

All Thermostat Models

  1. MAKE SURE THAT THE HVAC SYSTEM IS IDLE BEFORE PROCEEDING!
  2. Locate the switch for your thermostat in the breaker box.
  3. Flip the switch to the OFF position for 20-30 seconds.
  4. Return the switch to the ON position.
  5. The reboot process will take several minutes to complete.

How do I reset my analog thermostat?

Here are the step-by-step reset instructions:

  1. Turn your thermostat off by switching it to the off position.
  2. Find the breaker that powers your HVAC system and turn it off.
  3. Wait 30 seconds and turn the breaker back on.
  4. Turn your thermostat back on.

How do I reset a Trane thermostat?

How do I tell what year my Trane unit is?

The Year of manufacture is coded in the first digit of the serial number. The Month of manufacture is coded in the second letter of the serial number.