How do I set up SPA122?

Procedure

Using a LAN/Ethernet cable, connect the computer to the yellow Ethernet (LAN) port of the SPA122.
Open Internet Explorer browser (IE is required to ensure the adapter’s configuration page displays properly).
Log in: admin / (administrator password)
Click Voice > Provisioning.
Click Submit.

How do I get IP for SPA122?

At the voice prompt menu, enter 110 #. The phone will read back the IP address of the base, which can be entered into a browser to access the configuration. At the voice prompt menu, enter 210 #. The phone will read back the IP address of the base, which can be entered into a browser to access the configuration.

How do I access Spa 112?

How to access the web configuration utility on the Cisco SPA112

Open a web browser and enter the IP address of the phone adapter in the address bar, then press Enter.
Enter the username of the device in the Username field.
Enter the password of the device in the Password field.

How do I reset my SPA122?

RESET — Press the Reset button to restart the SPA122 device. To restore it to factory default settings, hold the button for 20 seconds.

How do I log into network configuration utility?

To open the web-based configuration utility: Open a Web browser. Enter the IP address of the WAP device that you are configuring in the address bar on the browser, and then press Enter. The Login page opens.

How do I set up an ATA device?

Step 1 Connect the network cable to your network and to the NETWORK port on the ATA. Step 2 Connect the phone cable to the PHONE 1 port on the ATA and to your analog device (phone or fax machine). If connecting a fax machine, connect it directly to the ATA.

How do I connect to Cisco ATA?

How do I set up an ATA?

Perform the following steps on the ATA Gateway server.

Extract the files from the zip file.
Run Microsoft ATA Gateway Setup.exe and follow the setup wizard.
On the Welcome page, select your language and click Next.
The installation wizard automatically checks if the server is a domain controller or a dedicated server.

How do I reset my Cisco ATA to factory settings?

Dial the following IVR code using the phone keypad: 73738 (RESET) followed by the # key. The IVR will ask you to confirm by pressing the 1 on the phone keypad. You must hang-up the phone to commence the reboot sequence.

How do I log into my Cisco router?

How to log-in to Cisco router?

Connect your device, either computer or mobile, to your internet.
Open a web browser and enter the IP address of your router. The IP address used for most CISCO routers is 192.168.
From the log-in page, enter your username and password.
Hit the Ok button to access your web interface!

What is network configuration Utility?

The Network Configuration Utility (NCU) configures a system’s Network Interface Card (NIC), TCP/IP settings, and domain information for use in Recovery Environment. Note: The PE Network Manager provides a comprehensive set of network options. However, most Recovery Environment scenarios work with the default settings.

How do I find my router’s web-based configuration page?

Accessing the router’s web-based setup page

Launch a web browser.
Enter “https://router” or the router’s default IP address, 192.168.
You will be asked to log in using the router’s admin password. If you have not set a custom password, just leave the Password field blank then click Submit.