How do I use Plantronics CS55?

How do I use Plantronics CS55?

If your desk phone doesn’t have a headset port, follow the Plantronics CS50-CS55 standard setup guide.

  1. Step 1- Connect AC power.
  2. Step 2- Pair your CS50 or CS55 headset to the charging base.
  3. Step 3- Plug in the included phone cord.
  4. Step 4- Plug into the headset port.
  5. Step 5- How to use your headset.

Is Plantronics CS55 Bluetooth?

No, the Plantronics CS50 and CS55 headsets do not use Bluetooth technology. They use other digital wireless technology designed for office use with greater roaming distance. The CS55 is 1.9 GHz DECT (Digitally Enhanced Cordless Telephony).

How do I pair my Plantronics wireless headset?

Position Your Headset When you wear the headset, the microphone should rest as close to your cheek as possible without touching. The microphone can be adjusted inward by the pivoting earpiece to optimize the position of the headset. Slide the headset over and behind your ear and fit the eartip into your ear.

How do I adjust the volume on my Plantronics headset CS55?

CS50/CS55/CS60: How to Adjust the Volume

  1. Make major adjustments to the speaking volume by using the switch on the bottom of the base (see Figure A, above).
  2. Make minor adjustments to the speaking volume by using the + and – buttons on the back of the base (see Figure B, above).

Can Plantronics CS50 connect to computer?

Plantronics PerSono Suite software provides the link between your CS50-USB headset and compatible softphone applications on your computer.

How do I change the battery in my Plantronics headset?

To replace the battery:

  1. Slide the battery cover off and remove it from the headset.
  2. Pull the battery out of the attachment clip.
  3. Grasp the battery connector and disconnect from the headset.
  4. Plug the new battery to the battery connector.
  5. Once connected, slide the battery into place.

How do I use my Plantronics headset on PC?

Plug the headset into a USB port on your computer. Set the headset as the default device. Test the headset. As an option, you can perform a sound recording on a Windows PC.

How do I increase the volume on my Plantronics Bluetooth headset?

The “+” and “-“ volume control can be located on the body of the headset or inline control. To increase the volume, tap the “+” button and to decrease the volume tap the “-“ button, some products indicate the volume limit with a tone/voice alert. The volume wheel is normally located on the left speaker of the headset.

How do I increase the volume on my PLT headset?

Some headsets have a single button for volume control. To increase the volume, tap the volume button, and to decrease it either tap or press and hold the button depending on your product, some products indicate the volume limit with a tone/voice alert.

How do I reset my Plantronics CS50?

To reset your CS50/CS55/CS60:

  1. Press in and hold the mute control (A) and the talk button (B) until the talk indicator light (C) on the headset starts blinking rapidly.
  2. Press and hold the talk button (B) again.
  3. Disconnect the AC power supply from the bottom of the base.
  4. Test the headset to ensure it works properly.

How to setup Plantronics wireless headset to auto answer?

Voyager Focus UC Firmware Release Notes

  • Voyager Focus UC Troubleshooting: Media Unmutes During Call
  • Voyager Focus UC Date Code Location
  • Voyager Focus UC Product Information
  • Voyager Focus UC Troubleshooting: Transmit/Receive Audio Not Routing to Headset
  • Voyager Focus UC: How to Pair to a Mobile Device
  • Voyager Focus UC Spares and Accessories

    • How to setup Plantronics CS series wireless headset system?

    Connects to: Desk phone

  • Ideal for: Office and desk-centric workers across the enterprise looking for a simple-to-set-up,simple-to-use wireless offering for managing desk phone calls
  • Talk time: Up to 7 hours ( CS540 );Up to 9 hours (CS510,CS520)

    • What accessories are available for a Plantronics headset?

    Coiled receiver – Detach the coiled receiver from the back of the phone base.

  • Connector cord – Find the flat connector cord.
  • Receiver cord – Plug the loose coiled receiver cord into the base of your Plantronics headset.
  • Adapter – Plug the AC/DC adapter into the bottom of the phones base then into the wall.

    • How does the Plantronics headset lifter work?

    The lifter sets under the telephone’s handset and raises the handset up with a motorized arm. The lifter is plugged into the wireless headset base and with just a push of a button on your wireless headset the lifter activates and you have your call.

    Powered by WordPress | WP Newspaper by WP Mag Plus