How do you change the draw length on a PSE chaos?

How do you change the draw length on a PSE chaos?

To adjust draw length, loosen the two 8-32 button head screws 2 full turns. This will allow the inner-cam to be lifted far enough to disengage the positioning pin and allow the inner-cam to rotate to a new position.

How do you adjust the draw weight on a PSE bow?

Changes in draw weight can be made by turning the limb bolt in or out. Before making any changes in weight, turn the limb bolt clockwise to the bottom position. Never use extreme torque when turning the bolt or damage to the limb may occur.

What year was the PSE chaos made?

PSE Chaos vs. Diamond Razor Edge

How do you change the draw length on a PSE Bow Madness?

58 second suggested clip2:065:03PSE 2010 Bow Madness Review and How To Change Modules – YouTubeYouTubeStart of suggested clipEnd of suggested clipHere remove this screw there’s no press needed to change the draw length in. This. Set the screwMoreHere remove this screw there’s no press needed to change the draw length in. This. Set the screw aside. And like I said we was in the B post. We’re going to move it down to the C post.

How do you adjust the draw length on a PSE Stinger 3g?

50 second suggested clip0:003:11How to adjust draw length on pse stinger x – YouTubeYouTube

How do you adjust the draw length on a PSE DNA?

61 second suggested clip1:484:58How To Change Draw Length and Poundage on PSE DNA – YouTubeYouTube

How do I adjust my PSE mini burner?

54 second suggested clip6:1214:54PSE Miniburner XT Compound bow – YouTubeYouTube

How do you adjust draw length on a bow?

60 second suggested clip1:022:02Changing Bow Draw Length – YouTubeYouTube

How do I measure my draw length?

To measure your draw length, stand with your back to a wall stretching your arms out against the wall. Measure the distance from the end of your middle finger to the end of your other middle finger, basically the length of both arms, hands and chest. This measurement, minus 15 then divided by 2, is your draw length.

How do you adjust a compound bow?

51 second suggested clip0:042:12Bowhunting How-To: Draw Weight Adjustment | LancasterArchery.comYouTube

How do I know my draw weight?

The steps of measuring the draw weight on a bow:

1. Ready your equipment: the bow and a draw weight scale.
2. Attach the draw weight scale to the bowstring, near the nock.
3. Raise the bow and pull it back to full draw, keeping good form.
4. Read the measurement on the draw weight scale.

How do you service a PSE bow in a Bow Press?

IMPORTANT: Before servicing any PSE bow in a bow press, back out each limb bolt the maximum number of turns from bottom. • Keep synthetic cables and strings waxed. Apply bow string wax to your synthetic cables and string before each shooting session.

Can PSE X technology bows be serviced?

PSE X Technology bows come with many unique features that will enhance your archery experience. USING A BOW PRESS WITH X TECHNOLOGY BOWS ALL PSE X Technology bows MUSTbe serviced in an approved bow press and require special consideration.

Can you adjust the cam on a PSE bow?

COMPOND BOW USER’S GUIDE CAM ADJUSTMENTS WHEELS/CAMS: Many PSE wheels and cams have adjustable features. Each one comes from the factory set up and ready to use but there may be occasions that you need to adjust the characteristics of your bow.

How often should I service my PSE bow?

Inspect the string and cables regularly and replace them when there is evidence of wear, every 5000 shots or every 12 months. IMPORTANT: Before servicing any PSE bow in a bow press, back out each limb bolt the maximum number of turns from bottom. • Keep synthetic cables and strings waxed.