How do you program an ESI phone?

How do you program an ESI phone?

ESI Phone Caller ID Key (Code 574)

1. Press and hold the key you wish to program (release this key when the system starts talking)
2. Enter your password if prompted.
3. Dial the code 574.
4. Press the same programmable button again to save it.

How do I reset my ESI phone?

slightly “pinch” the sides of the cord to release it from the port. Once unplugged, wait at least 30 – 45 seconds, then plug it back in. momentarily, etc. This is normal during the reboot process.

How do I change my ESI phone extension?

To change the name of an extension:

1. Press the PROGRAM button.
2. Press the HOLD button.
3. Password is 456#.
4. Choose option 321.
5. Enter the extension number to edit, then press pound.
6. Enter the new name, press pound after each letter and pound again when done.
7. When done entering the new name, press RELEASE.

How do I turn up the ringer on my ESI phone?

On ESI digital phone models dPhone4, 55D and 60D: To adjust the ring volume or change the ring tone, press PROG/HELP or HELP. Then press 4 for station audibles, and 1 to change the tone or 2 to adjust ring volume. On ESI IP phone models, press the volume up or down when the phone is idle to adjust ring volume.

How can I check my call history on my phone?

How to find Call Logs on your phone. To access your call history (i.e. a list of all of your call logs on your device), simply open your device’s phone app which looks like a telephone and tap Log or Recents. You’ll see a list of all incoming, outgoing calls and missed calls.

How do I forward my ESI phone to my cell phone?

1. Press CFWD or other programmed FORWARD key to use the Call Forward feature 2. Dial the extension number OR external phone number to which calls should forward 3. Press # key to confirm 4.

How do I change the name on my ESI phone?

Choose option 321. Enter the extension number to edit, then press pound. Enter the new name, press pound after each letter and pound again when done. When done entering the new name, press RELEASE.

How do I turn the ringer off on my ESI phone?

How do I use the ESI Dex on the 48-key feature phone?

Page 39Special keys Manual method (on the 48-Key Feature Phone) 1. While your station is idle (or just after receiving dial tone), press ESI-DEX. This causes the Esi-Dex menu to appear, as shown: Note: Your display may differ, depending upon the availability of certain Dexes on your system. Page 40: Deleting Names From Your Personal Dex

How many pages are in the ESI 48-key feature phone manual?

Feature phone for the esi-50l communications server (84 pages) Telephone ESI IVX20 Installation Manual (55 pages) Telephone ESI eSIP Evolution Series Instruction Button programming (19 pages) Telephone ESI IP 200 Installation Manual Ip series (93 pages) Summary of Contents for ESI 48-Key Feature Phone

How do I use a cordless phone with an ESI feature phone?

Tip: To use a cordless phone in conjunction with an ESI Feature Phone, program a programmable feature key ( 5 6 5 ) to easily forward calls to the cordless phone when out of your office. Have the Installer program the cordless phone’s station programming to forward calls not sent to the mailbox. Page 50: Call Forwarding

How do I retrieve a held call from an ESI feature phone?

ESI Feature Phone operation To retrieve a held call To retrieve a held call from the same ESI Feature Phone where it was put on hold, press HOLD again and dial the appropriate line number (using the display for reference). Page 34: Paging If you frequently page, assign 1 9 9 to a programmable feature key (see pp. C.2–C.3).