# How do you subnet an example?

## How do you subnet an example?

Solution-

1. Number of bits reserved for network ID in the given subnet mask = 20.
2. So, Number of bits reserved for Host ID = 32 – 20 = 12 bits.
3. Thus, Number of hosts per subnet = 212 – 2 = 4094.
4. In class B, 16 bits are reserved for the network.
5. So, Number of bits reserved for subnet ID = 20 – 16 = 4 bits.

## How do you subnet step by step?

255.248 or /29.

1. Step 1: Convert to Binary.
2. Step 2: Calculate the Subnet Address. To calculate the IP Address Subnet you need to perform a bit-wise AND operation (1+1=1, 1+0 or 0+1 =0, 0+0=0) on the host IP address and subnet mask.
3. Step 3: Find Host Range.
4. Step 4: Calculate the Total Number of Subnets and.

## What is subnetting and examples of subnets?

Type of Subnetting There are two types of Subnetting FLSM and VLSM. In FLSM, all subnets have equal number of host addresses and use same Subnet mask. In VLSM, subnets have flexible number of host addresses and use different subnet mask. Following figure shows an example of FLSM and VLSM.

## How is subnetting calculated?

1. Step 1: Determine the network class of the given IP Address 192.35.
2. Step 2: As the IP starts with 192, the address falls on Class C.
3. Step 3: Calculate Number of bits, to define the subnets.
4. Step 4: Formula to calculate Number of bits = Log2(Number of subnets + 2).

## What are the 3 main classes of subnets?

Classes A, B, and C are used the most often by different networks. Subnet classes are made unique by the number of bits their IP addresses have dedicated to a network and the number of bits dedicated to hosts.

## How is subnet calculated?

The number of subnets is found by counting the number of bits by which the initial mask was extended, also known as the subnet bits. Our initial address allocation was 192.168. 0.0 with a mask of 255.255. 0.0.

## What do you mean by subnetting?

A subnet, or subnetwork, is a network inside a network. Subnets make networks more efficient. Through subnetting, network traffic can travel a shorter distance without passing through unnecessary routers to reach its destination.

## How does subnetting work?

Subnetting works by applying the concept of extended network addresses to individual computer (and another network device) addresses. An extended network address includes both a network address and additional bits that represent the subnet number.

## What is subnetting explain?

A subnetwork or subnet is a logical subdivision of an IP network. The practice of dividing a network into two or more networks is called subnetting. Computers that belong to the same subnet are addressed with an identical most-significant bit-group in their IP addresses.

## How to create subnets?

In the left navigation pane,choose Subnets and then Create Subnet .

• For Name tag,enter a name for your subnet,such as Public subnet .
• For VPC,choose the VPC that you created earlier.
• For Availability Zone,choose the same Availability Zone as the additional private subnet that you created in the previous procedure.
• ## What is an example of a subnet mask?

255.255.0.0. Mask 255.255.255.0 has 16 bits for the subnet and 8 bits of the host.

• 255.255.255.0. This would allocate 8 bits for the subnet and 8 bits for the host.
• 255.255.255.128. 9 .Given the subnet Mask 255.255.255.192 What is the host address and subnet of the following IP address 197.1.2.67.
• ## What is subnetting, benefits, and how does it work?

– Communication between one subnet to another subnet requires a router. – Since each subnet requires dedicated IP addresses as subnet ID and broadcast address, it wastes IP addresses. – Creating too many subnets can create unnecessary complexity and impact the effectiveness of network administration.

## How to master subnetting?

– Pulse-width modulator, frequency generator – “Wait until interrupt” command – Convert frequency measurement to input capture peripheral – Allow frequency measurement on any pin – Show a report of the current configuration settings and pin states. – Integer repeat values for bulk read, clock ticks, delays, etc. – A CRC generator