How to fix ahci port 0 device error?

How to fix ahci port 0 device error?

Replies (6) 

1. Set your BIOS so that it uses the DVD drive as its primary boot device.
2. Boot the machine with your Windows 7 Repair CD.
3. Press a key if prompted to boot from the DVD.
4. Select “Repair PC” from the menu.
5. Select Repair when prompted.
6. Select System Restore when prompted.

What is port 0 on asus laptop?

0 port, this means the USB 3.0 port supports the shutdown charging function. …

What is AHCI port?

Advanced Host Controller Interface, or AHCI, is a technical standard for an interface that enables software to communicate with Serial ATA (SATA) devices. These peripheral component interconnect (PCI)-class devices move data between system memory and SATA storage media.

How do I fix my USB ports on my Asus laptop?

[Notebook] Troubleshooting – How to fix USB connection problems

1. Prerequisites.
2. Update BIOS and Windows Update.
3. Reinstall USB Root Hub driver in Device Manager.
4. Reinstall USB Host Controller driver in Device Manager.
5. Restore the system from restore point.
6. Reset the PC.

What is the use of Type C port in Asus laptop?

With a USB-C connection, you can charge your Windows 10 PC, and you can also connect to other USB Type-C devices such as mobile phones, docking stations, display adapters, and other devices that have a USB-C port.

How do I enable AHCI in Windows 10?

Right-click the Windows Start Menu once more. Choose Command Prompt (Admin). Type this command and press ENTER: bcdedit /deletevalue {current} safeboot (ALT: bcdedit /deletevalue safeboot) Reboot once more and Windows will automatically start with AHCI drivers enabled.

How do I enable AHCI?

Method #1: Enable AHCI mode through the registry You can do it by right-clicking on the “Start” button and then selecting “Run“. In the text field, you should enter the command regedit and confirm it with the button “OK“.

How do I fix an unresponsive USB port?

How to Fix USB Port Issues

1. Restart your computer.
2. Look for debris in the USB port.
3. Check for loose or broken internal connections.
4. Try a different USB port.
5. Swap to a different USB cable.
6. Plug your device into a different computer.
7. Try plugging in a different USB device.
8. Check the device manager (Windows).

How do you reset a USB port?

5 Best Solutions to Reset USB Ports That aren’t Working

1. Physically Inspect the USB Ports.
2. Restart Your Computer.
3. Check your Power Management Settings.
4. Reset USB Ports through Disabling and Re-enabling the USB Controller.
5. Reset USB Ports with Windows Troubleshooter.

How do I enable Type-C port on my laptop?

USB-C overview

1. Select the Start button, then select Settings > Devices > USB. Open USB settings.
2. Select or clear the Notify me if there are issues connecting to USB devices box.

How do I select AHCI in BIOS?

1. Enable AHCI mode in BIOS

1. Shut down your system.
2. Power the system On, and tap the F2 key to boot to BIOS.
3. Go to System or Hardware configuration (this will differ based on BIOS).
4. Look for AHCIor SATA mode.
5. Enable AHCI or under SATA mode, set it to AHCI.
6. Save and Exit BIOS.
7. AHCI will be enabled.

What is this AHCI device error?

This AHCI device error was generated from the BIOS’ S.M.A.R.T. detection. It has absolutely nothing to do with your operating system. At the time you see this error message, the operating system has not been yet started. S.M.A.R.T. has detected that your hard drive at port 0 is faulty and the drive may or may not be accessible.

What to do if my AHCI port is not working?

If you are using a SATA Hard disk, then switch the AHCI port to IDE port and check if it helps. Step 3: Check if there a loose fitting data and power cables/connectors.

What does it mean if my hard drive is at Port 0?

It has absolutely nothing to do with your operating system. At the time you see this error message, the operating system has not been yet started. S.M.A.R.T. has detected that your hard drive at port 0 is faulty and the drive may or may not be accessible.