What does max7300 mean?

What does max7300 mean?

The MAX7300 is controlled through an I²C-compatible 2-wire serial interface, and uses four-level logic to allow 16 I²C addresses from only two select pins. The MAX7300AAX and MAX7300ATL have 28 ports and are available in 36-pin SSOP and 40-pin thin QFN packages, respectively.

How many SPI ports does the max7300 have?

The MAX7300AAX and MAX7300ATL have 28 ports and are available in 36-pin SSOP and 40-pin TQFN packages, respectively. The MAX7300AAI and MAX7300ATI have 20 ports and are available in 28-pin SSOP and TQFN pack- ages. For an SPI-interfaced version, refer to the MAX7301 data sheet.

What is the latency of max7300 serial interface?

Serial Interface Latency When a MAX7300 register is written through the I2C interface, the register is updated on the rising edge of SCL during the data byte’s acknowledge bit (Figure 5). The delay from the rising edge of SCL to the internal register being updated can range from 50ns to 350ns.

How many max7300 devices can share the same interface?

The MAX7300 has 16 possible slave addresses (Table 3), and therefore a maximum of 16 MAX7300 devices can share the same interface. Message Format for Writing the MAX7300