What does the red light on a Riccar vacuum mean?
Replacing the vacuum bag Change the vacuum bag when the full bag indicator light is flashing RED or suction power is weak. The bag compartment will not close without a bag in the unit or if the bag is not properly installed. 1. Open the bag compartment.
How do you unclog riccar?
Use a broom handle to poke any debris that may become trapped in the hose. Unplug the machine and use your fingers to pull out any debris in the machine’s mouth. Cut any thread or string that may have become wound around the rollers. Plug the machine back in and press the reset button on the back of the vacuum.
Where is the reset button on a riccar canister vacuum?
Turn off the vacuum cleaner and power nozzle then unplug the power cord. Remove the object preventing the brushroll from turning. Locate the circuit breaker button on the back of the power nozzle and press it to reset the breaker.
Where is the serial number on a Riccar vacuum?
The model number and serial number of your Riccar vacuum is located on the vacuum itself. Look for a silver label typically with the Riccar logo or ETL or UL logo.
How do I reset my vacuum?
Allow the vacuum cleaner to cool by remaining idle and switched off, with the plug removed from the wall outlet. Wait at least 30 minutes until the thermal cutoff breaker has reset itself. Some brands of vacuum may take longer to reset than others.
What do you do when your vacuum won’t turn on?
If the vacuum cleaner still won’t start, make sure the outlet has power by plugging a lamp or small appliance into the outlet. If the outlet is dead, reset the house circuit breaker for the outlet. If the outlet still won’t work, have an electrician repair the outlet.
How do I change the filter on my riccar vacuum?
Unplug canister and remove HEPA filter cover. Remove and discard used HEPA filter. Insert new HEPA filter. Press the “reset filter button” located next to the HEPA filter.
Can you reset a vacuum cleaner?
Allow the vacuum cleaner to cool by remaining idle and switched off, with the plug removed from the wall outlet. Wait at least 30 minutes until the thermal cutoff breaker has reset itself. Some brands of vacuum may take longer to reset than others. Try the vacuum again.
Where is the reset button on a Riccar tandem air vacuum?
Locate the Thermal Motor Protection Reset Button on the back of the vacuum. Press the button and resume vacuuming.
Why vacuum suddenly stopped working?
It might sound simple, but lack of power is often the cause of a vacuum cleaner that won’t work. Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don’t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem.