What is a section of a wall?
A Wall Section is a technical drawing that lets you see inside a wall. Rarely will a wall be made of just one solid material. Most often what you see on the outside is not all there is on the inside! Some walls use wood for the structural system. Others use CMU (concrete masonry units or blocks).
What is a building section?
A section is drawn from a vertical plane slicing through a building. This is as if you cut through a space vertically and stood directly in front looking straight at it. Sections are a common design drawing and technical architectural or engineering convention for graphic representation of architecture.
What are the two types of building section?
A section might be cut all the way through a building (called a building section), or only through a wall (wall section). Both may be needed, because the small scale and complexity of a building section generally means the materials and details related to the walls cannot be drawn there.
What is a typical wall section comprised of?
The Typical Wall sheet shows section cuts of the exterior walls from the roof down through the foundation. Imagine if you could cut through a house like a cake and take a look at a cross section of the layers, thats what a wall section is.
What is wall thickness?
Wall thickness is defined as the distance between one surface of the 3D model and its opposite surface. It is the required thickness that a 3D model should have.
What is section in interior design?
Sections are technical drawings through a vertical slice of a space. The difference from the elevations is that section show two or more adjacent rooms allowing to see the thickness of the walls.
What is a section detail?
A ‘section drawing’, ‘section’ or ‘sectional drawing’ shows a view of a structure as though it had been sliced in half or cut along another imaginary plane. The scale of a section drawing will depend on the size of the building being drawn and the level of detail that needs to be shown. …
What are section details?
A ‘section drawing’, ‘section’ or ‘sectional drawing’ shows a view of a structure as though it had been sliced in half or cut along another imaginary plane. The scale of a section drawing will depend on the size of the building being drawn and the level of detail that needs to be shown.
What is elevation plan?
An elevation drawing is an orthographic projection drawing that shows one side of the house. The purpose of an elevation drawing is to show the finished appearance of a given side of the house and furnish vertical height dimensions.
What is a typical wall?
Most interior walls are constructed with 2-by-4 framing, and each 2-by-4 has a nominal width of 3 1/2 inches. Drywall typically covers both sides, and it’s usually 1/2 inch thick, which makes the wall 4 1/2 inches thick. Door jambs are typically milled to this width so the edges of the jabs come flush with the walls.