What is CS coating?
CS Coatings UV BLAST Clear Seal is a clear overcoat that can be applied to any lure to reflect critical UV light. Your lure will flash even in dark, murky water where UV light, but not visible light, penetrates. And with UV BLAST! you get the strongest UV enhancer available today.
What is the best fishing lure paint?
Overall assessment. From our testing we believe that nail polish is a completely acceptable means of painting a lure or jig. It is economical, easy and plenty durable for most fishing situations. We especially like using nail polish to touch up lures with minor scratches.
What can I use to thin vinyl paint?
Registered. You cannot use any type of thinner except that which is specifically made for Vinyl paint. Here is a link for purchase of a pint for about $15, not a bad deal as opposed to the small bottle price.
What kind of paint is used on fishing lures?
Water based acrylic airbrush paints are the best for painting fishing lures. Unlike other urethane based airbrush paints, water based acrylics are non-toxic and easy to use. Brands like Createx paint work especially well for binding to the lure and providing great color and depth to the design.
What kind of paint do you use on lead jig heads?
Pro Tec powder paint. It’s a baked on finish so you’ll need an old toaster oven and a rack that fits inside. The other option is to paint em with acrylic then coat them with 30 minute epoxy.
What paint is used on fishing lures?
What is the solvent for vinyl paint?
Apply the vinyl paint solvent. Many vinyl solvents are dually marketed as adhesive removers. A good brand to consider is Grog, primarily because it is one of the few solvents that is 100% biodegradable and odorless (according to AutoTrimDesign.net). Additionally, Grog is easy to apply using only a paintbrush or rag.
Can you spray paint lead jigs?
Spray painting works, you will get a LOT of wasted paint from over-spray though. In-fact you will get more over-spray than what hits your jig. I have done this and even after baking them powder paint is sooooo much better.
What is the toughest finish ever put on a lure?
CS Coatings’ Vinyl Lure and Jig Paint has been “The Toughest Finish Ever Put On A Lure” for more than 25 years. Our Vinyl Paint’s incredible flexibility makes it able to withstand anything you can throw at it!
How to thin vinyl lure and jig finish?
This is the thinner that MUST be used to thin vinyl lure and jig finish. Don’t try using acetone, Lacquer thinner or paint thinner. Vinyl lure and jig finish is great choice for painting your fishing lures. Vinyl finish can be dipped, brushed or sprayed. Vinyl jig finish is chip resistant and adheres well to lead. Drying time is about 10 minutes.
What is the best paint for fishing lures?
Don’t try using acetone, Lacquer thinner or paint thinner. Vinyl lure and jig finish is great choice for painting your fishing lures. Vinyl finish can be dipped, brushed or sprayed. Vinyl jig finish is chip resistant and adheres well to lead.
Can you use paint thinner on vinyl lures?
This is the thinner that MUST be used to thin vinyl lure and jig finish. Don’t try using acetone, Lacquer thinner or paint thinner. Vinyl lure and jig finish is great choice for painting your fishing lures. Vinyl finish can be dipped, brushed or sprayed. Vinyl jig finish is chip resistant and adheres well to lead.