What is the default IP of Mercusys router?

What is the default IP of Mercusys router?

192.168.1.1
The default IP address is 192.168. 1.1 (or http://mwlogin.net/). 3. Ensure that the IP address of your computer is in the same subnet with the device.

How do I log into my router admin panel with its default IP address?

Login to Router admin panel using its default IP Address – 192.168.0.1 / 192.168.1.1. Enter the default username and password (admin/admin in most cases). Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password .

How do I reset my router Mercusys?

With the router power on, press and hold the Reset button for at least 5 seconds. Release the Reset button and wait for the router to reboot.

How do I access Mercusys?

Launch a web browser and enter http://mwlogin.net or 192.168. 1.1 in the address bar. Use admin (all lowercase) for both username and password, and then click Login.

How do I setup my Nokia wireless router?

Setting up your network

1. Open the Nokia WiFi app on your phone.
2. Tap Get Started.
3. Connect the app to the root device.
4. Guided setup instructions.
5. After the root device is found, you will be asked to join the network that is broadcasted from the root device.

What is Mercusys router admin password?

How do I connect to the access point using the default address?

To communicate with the Access Point using the default address, follow this procedure: 1Set the IP address of your PC to any address in the same IP subnet as the Access Point (for example 192.168.1.10), with subnet mask the same as the Access Point (255.255.255.0). 2Point your web browser at the Access Point default address: 192.168.1.250.

How do I set up a 3Com access point?

1Select a channel for the Access Point to use or Clear Channel Select if you want the Access Point to choose an unused channel on start-up. 2Enter a Service Area Name/SSID. The Service Area Namedefault for 3Com products is “3Com”.

How do I import wireless configurations from 3Com wireless network adapters?

Some 3Com Wireless Network Adapters allow you to import Wireless configurations via a ‘profile’. The Access Point can generate a profile so that you do not need to configure your Wireless PCs manually.

What is the default static IP address of the access point?

During boot up, if the Access Point does not detect a DHCP server after 2 or 3 three minutes, it will assign itself the factory default static IP address of 192.168.1.250, subnet mask 255.255.255.0. To communicate with the Access Point using the default address, follow this procedure: