What is the replacement for Cisco 3750?

What is the replacement for Cisco 3750?

Some Cisco 3750 switch users said that they are looking to replace their pair of 3750G switches (Stacked) by a new suitable Cisco catalyst switch. In fact, the Cisco catalyst 3750-X series is a not bad choice. The Catalyst 3750G uses stackwise and 3750X uses stackwise+.

Is a Cisco 3750 a Layer 3 switch?

The Cisco Catalyst 3550, 3560, 3750, 4500, 6500 series would be good examples of Layer 3 switches.

Is Cisco 3750 a PoE?

Cisco 3750 Series 24 Port PoE Switch, WS-C3750-24PS-S, Refurbished, Original. Cisco Catalyst Switch with (24) Fast Ethernet/Power ports with IEEE 802.3af and (2) SFP (mini GBIC) uplinks.

What does a Cisco 3750 weigh?


Stack Forwarding Rate 13.1 mpps
Measured 5% Throughput Power Consumption (w/max possible PoE Loads): Total Output BTU 345 BTU/hr
Weight: 13.2 lbs
MTBF: 166,408 hours
AC Input Voltage 100-240VAC

Is Cisco 3750 end of life?

Cisco announced the end-of-sale and end-of-life dates for the Cisco Catalyst 3750G, 3560G, 3750-E, and 3560-E Series Switches. The official end of sale date is January 30, 2013. End of Vulnerability/Security Support: OS SW – January 30, 2016. Last Date of Support: HW – January 31, 2018.

What is replacing Cisco 3850?

The Cisco Catalyst 9300 Series is Cisco’s leading fixed enterprise switching access platform. It is the new generation of the access platform, with many additional capabilities, and is well suited for enterprises looking to upgrade from their existing Cisco Catalyst 3650/3850 Series deployment.

Is Cisco 3750 a gigabit switch?

In addition, the Cisco Catalyst 3750 Series is optimized for high – density Gigabit Ethernet deployments and includes a diverse range of switches tha t meet access, aggregation, or small-network backbone-connectivity requirements.

How many types of Cisco switches are there?

two types
Cisco offers two types of network switches: fixed configuration and modular switches. With fixed configuration switches, you cannot swap or add another module, like you can with a modular switch. In enterprise access layers, you will find fixed configuration switches, like the Cisco Catalyst, 2960-X series.

How do I enable PoE on a Cisco switch?

How do I configure my CISCO Switch to properly power my PoE client?

  1. enable.
  2. configure terminal.
  3. interface interface-id.
  4. power inline {auto [max max-wattage] | never | static [max max-wattage]}
  5. end.
  6. show power inline [interface-id | module switch-number]
  7. copy running-config startup-config.

How deep is a Cisco switch?

The Cisco Catalyst 3650 Series Mini Switches are less than 12 inches deep and have the same functionality as the larger switches. The small size makes it perfect to deploy in tight wiring cabinets, racks, or places where switch depth is a concern and real estate is at a premium.

Is the Cisco 3560x PoE?

In addition to PoE 802.3af, the Cisco Catalyst 3750-X and 3560-X Series Switches support PoE+ (IEEE 802.3at standard), which provides up to 30W of power per port and UPOE, which provides 60W of power per port (only on UPOE-capable models).

Are the links between the Cisco Catalyst 9300 and 3850 Series switches interchangeable?

Are the uplinks between the Cisco Catalyst 9300 and the 3850 interchangeable? All existing 3850 uplink modules may be used in the Catalyst 9300 platforms. However, the new 9300 uplinks modules are not supported on the 3850 platforms.

How to configure a Cisco 3750?

dynamic auto – The Default. Creates a trunk link if the neighboring interface is set to trunk or desirable mode.

  • dynamic desirable – Creates a trunk link if the neighboring interface is set to trunk,desirable,or auto mode.
  • trunk – Sets the interface in permanent trunking mode.
  • How to reset Cisco Catalyst 3750 back to factory defaults?

    hold the “mode” reset button up to 15 seconds or more till only one system green light. Then release it, the green light will blink. “Release the Mode button after approximately 15 seconds when the SYST LED turns solid green. When you release the Mode button, the SYST LED blinks green.”

    What is a Cisco Catalyst?

    Catalyst is the brand for a variety of network switches, wireless controllers and wireless access points sold by Cisco Systems.While commonly associated with Ethernet switches, a number of different network interfaces have been available throughout the history of the brand. Cisco acquired several different companies and rebranded their products as different versions of the Catalyst product line.

    What is a catalyst switch?