What is the standard size of fascia board?
Fascia Board Sizes Fascias are typically made from 1-inch material, with the width being enough to cover the rafter width. Typically rafters will range from 2×6 to 2×8, although some are larger depending on the roof construction. Therefore, the more common fascia board sizes are 1×6 or 1×8.
What size wood is used for fascia board?
You construct fascia boards out of 1-by lumber. The width depends on the width of the rafters, but since builders generally use two-by-six or two-by-eight lumber for roof construction, the most common dimensions for fascia boards are one-by-six and one-by-eight.
What size is timber fascia?
The timber fascia board sizes available in this profile are 180×25, 188×30, 210×30, and 230×30. One product variation with size 188×30 is included in this profile.
What is the best wood to use for fascia board?
Many different types of wood are suitable for fascia boards. Spruce, pine and fir are all popular and relatively inexpensive options. However, some roofers prefer to use cedar, cypress or redwood for fascia boards. While they are more expensive, these woods better resist moisture, even when left unsealed.
How do I know my fascia size?
The remaining height of the street side face of the fascia board can be determined by deducting the thickness of the bevel cutoff. Multiply the 1-1/2 inch width of the fascia board by the slope of the roof (e.g. 4/12). 1.5” times 4 divided by 12 = 0.5 or ½ inch.
Is fascia a 1×6?
Fascia Board Sizes #1 – 1×6 This is the most common fascia board you will find. Usually you have a 2×4 sub fascia behind this fascia board. Standard gutter size for residential homes is five or six inches. At the backside of a 5 inch gutter, the fascia board mounting area will be four inches tall.
Can I use 2×4 for fascia board?
Install 1×6-80″ fascia boards to the 2×4 trusses. Install the fascia so the bottom edge of the roof sheathing will rest on the beveled edge. Install 22-1/2″ long 2x4s between the trusses to support the fascia boards where they butt.
What is the best material for fascia boards?
Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.
What is the difference between fascia and barge boards?
While fascias and soffits support the guttering of a property, barge boards are attached to a gable to provide added strength, protection and aesthetics. They appear as an inverted ‘V’ under the edges of the roof verge, protecting the exposed materials much like a fascia.
How tall should my fascia be?
Eaves tiles The height of the board or fillet above the top of the rafter should equal the combined height of the batten and one thickness of interlocking tiles. This should ensure that the eaves tiles lay in the same plane as all the tiles above them.
What is a fascia UK?
Fascia. The fascia board is the long, straight board that runs along the lower edge of the roof. The fascia is fixed directly to the lower ends of the roof trusses and usually does all the work of supporting the lower edge of the bottom row of tiles. The fascia board also carries all the guttering.
How do you measure a fascia board?
Measuring and Cutting the Fascia. Use a tape measure to find the length of your roof. Climb a ladder near the corner of your roof and tape the end of your tape measure against the rafter using duct tape. Get off of your ladder and reposition it at the other end of your roof.
What is timber fascia board used for?
Timber fascia board or wood fascia board is used in roof construction but you may decide to use our profiles for other applications. Most of our fascia and soffits can be manufactured in the timber species of your choice.
What size is a fascia board?
Fascia – Chamfered/Splay – 145x22mm (5-11/16×14/16-in) | For rafter endsFascia Board – Chamfered and splayed. Wood for rafter ends. This product is made to order giving the flexibi..
What is the best wood for fascia and soffits?
Most of our fascia and soffits can be manufactured in the timber species of your choice. The most popular wood species for fascia, soffits and barge boards are; Western red cedar, European oak, Douglas fir and Larch. Accoya fascia board is a highly recommended sustainable option that is extremely durable.
How thick does fascia need to be for guttering?
If you require a full fascia replacement where you are completely removing the existing timbers you will require at least a 16mm board thickness to meet BBA approval, this will ensure your fascia board is thick enough to securely nail directly to the rafters and are strong enough to hold lengths of guttering.