What material is used for soffits?
Although unsanded and touch-sanded grades of plywood are often used for soffits, optimum appearance and finish performance is achieved by using panels with Medium Density Overlay (MDO), or textured (such as APA 303 Siding) or sanded A-grade faces.
How are soffit boards fixed?
Soffit, or soffit boards, are similar to fascia, but instead of running parallel to the walls of the building, they are installed at a 90-degree angle to the walls. Soffit boards are fitted underneath the fascia boards, to fill the gap between the fascia and the wall.
What material is best for soffit and fascia?
The Materials You Choose Matter, Too Most roofing and siding professionals recommend that you go with either aluminum or vinyl for your fascia and soffit, as both are more water-resistant, and neither are as prone to rot.
What wood is used for soffit boards?
Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.
Do you nail soffit tight?
Be sure to leave space for the full expansion allowance in the receiving channel. If you’re using a nailing strip (as in figure 4), do not nail tightly—allow movement for expansion. Continue installing the panels by locking and nailing the soffit in place.
What wood is used for soffits?
What type of plywood is used for soffits?
What goes on first fascia or soffit?
Fascia and soffit are installed after the roof installation is finished. It is ideal that soffit and fascia materials be installed before you place tiles or any other type of roofing material on the roof. There are different types of finished and variations that can be used for the soffit.
How do you make soffits with fascia board?
Inner edge of soffit abuts to wall or sits on bricks. Outer edge of soffit should over hang by 10mm to fit groove in back of fascia board. E. Nail fascia board to rafter feet with sufficient height to create tile kick. Allow for height of over fascia ventilator if required. F. Make soffit and fascia joints between rafters.
How is the utility board attached to the soffit?
5) If roofspace ventilation has been created by using the over fascia ventilation, the utility board is fitted on top of the ogee or Euroboard leg and secured to the soffit batten using 30mm A4 stainless steel fixing pins.
What is the best material for soffits?
Wood is one of the oldest materials used for soffits, and like wood siding is still around today. Also like wood siding, wood soffits have a grain and texture that makes them very visually appealing. They may be perforated or have vents placed in them, or they may be completely solid.
Can a soffit ventilator be used with a euroboard fascia?
3) A soffit ventilator profile can be used to join the Euroboard fascia and hollow soffit board. If the hollow soffit board is running along its length, the first plank should have the location leg removed, allowing it to fit into the soffit ventilator.