Where are HearthStone stoves made?

Where are HearthStone stoves made?

Vermont
For years, our dedicated Vermont craftsmen have been committed to building quality stoves, handcrafting each HearthStone to meet the highest standards using the finest materials and the most advanced heating technology. As proof, every HearthStone soapstone stove is signed by the stove builder.

How long does a HearthStone wood stove last?

With the air control set to low, your stove will burn slowly and efficiently for up to 30 hours*. This long, slow, efficient burn means you’re getting the most heat out of each piece of wood.

Is HearthStone a good wood stove?

Hearthstone Wood Stoves – Overall Overall, Hearthstone wood stoves are a great investment. Since most stoves feature soapstone construction and utilize a secondary combustion or non-catalytic design, the stoves are easy to operate, require low maintenance and look beautiful in your home.

Who owns HearthStone stoves?

Industrias Hergóm, S.A.
Luckily, what was left of HearthStone was purchased in January 1989 by Spanish foundry and enameling giant Industrias Hergóm, S.A., an event that has resulted in a brand new and very successful HearthStone Quality Home Heating Products headquartered in a 61,000 sq. ft.

Who makes soapstone woodstoves?

M. Teixeira Soapstone has expanded its product line to include the Cove 2, a cast iron and soapstone wood-burning stove. This contemporary wood-burning stove burns up to 8 hours, heats up to 1,500 square feet, and is available with or without soapstone.

Are soapstone wood stoves better?

While steel and cast iron wood heaters will burn hotter, your soapstone wood stove will give you longer-lasting consistent heat. Not only will you have to add wood to your fire less, but the overall burn of your HearthStone wood burner is very efficient.

Can you burn coal in a Hearthstone wood stove?

Wood Heat Stoves the stove is designed to burn coal only with the Hearthstone Coal Conversion–which is accompanied by complete instructions for building and maintaining a coal fire.

How often should you change fire bricks in a wood stove?

We will be Happy to fit them For Free.

  1. The firebricks in a stove reflect heat back into the fire which allows for a hotter, cleaner burn but these are wear items and will need replacement from time to time.
  2. Example 1.
  3. Example 2.
  4. Example 3.
  5. Example 4.
  6. Wood burning – sweep every 3 months in use.
  7. Smokeless – sweep every year.

Can you burn coal in a HearthStone wood stove?

Are soapstone wood stoves worth the money?

If you use your heating appliance regularly, then a soapstone unit will save you time and money because you will not have to add fuel to the fire as often as you would with a standard unit. These appliances make a solid investment that you can benefit from for many years.

What does HearthStone’s mean?

hearth
noun. a stone forming a hearth. home; fireside; hearth. a soft stone, or a preparation of powdered stone and clay, used to whiten or scour hearths, steps, floors, etc.

Are soapstone stoves worth the money?

How to build a hearth for a wood burning stove?

The VWA must be an obvious colour difference from the area around it.

  • The VWA must be defined and obvious.
  • The VWA must be of a non-combustible material (e.g.
  • The VWA must be wider than the stove by at least 150mm each side (gap can be less if stove is against a suitably heat-resistant wall).
  • How to build hearth pad for wood stove?

    Tile (Floor and Decor)

  • Hardiebacker (Floor and Decor)
  • Mapei UltraFlex LFT Mortar (Floor and Decor)
  • What are the parts of a wood burning stove?

    Primary Air

  • Secondary Air
  • Tertiary Air
  • What is the largest wood stove?

    Real World Tested Performance

  • Cord Wood Max BTU 57,000 BTU’s
  • Efficiency 81%
  • Maximum Heat Input 708,275
  • Constant Heat output on High 47,809 BTU’s/hr up to 12 hours
  • Constant Heat output on Low 14,313 BTU’s/hr up to 40 hours
  • Square Feet Heated 1500 – 3000
  • Average Heating Time 10 to 20 hours
  • Potential Burn Time on Low 40 hours
  • Emissions (grams/hour) 1.1 g/hr