Why is jarrah wood so expensive?
Jarrah’s natural properties include a high resistance to weather, rot, termites and even marine borers, making it valuable for a range of outdoors uses.
Is jarrah wood expensive?
Pricing/Availability: Jarrah is a widely distributed timber throughout southwest Australia, and prices for local lumber should be moderate. Prices for imported Jarrah tends to be in the mid range for exotic lumber. Curly pieces, or burl block are likely to be much more expensive.
How much is jarrah wood worth?
MOST POPULAR: 85x20mm Standard & Better Grade – $8.05 per lineal metre.
How can you tell if wood is jarrah?
The grain tends to be straight but can be interlocking or wavy with a medium to coarse texture. Some boards can contain gum pockets or streaks as a naturally-occurring defect. Jarrah can also exhibit a curly figure. The curly grain can be quite spectacular and shimmers when the surface is finished.
Is jarrah a soft or hardwood?
Australian hardwood
Jarrah is an Australian hardwood. It is heavy, tough with a distinctive dark red colouration. Jarrah can be highly polished and accepts most finishes well. It is commonly found on flooring, panelling, joinery, decking and furniture.
Is kiln dried wood stronger?
So, it isn’t so much a matter of stability as it is a matter of controlled environment and consistency. Some woodworkers feel air-dried lumber is nicer to work, and that kiln dried lumber is a bit more brittle. It is a matter of personal choice.
Is jarrah a good firewood?
Jarrah – Jarrah is a common and well sought-after Eucalyptus hardwood for home heating in Western Australia. Both traces of smoke and ash are minimal, making it an ideal solution. White Gum- Also known as wandoo, is a dense and heavier hardwood, and is also a common Eucalyptus firewood variety in Western Australia.
How hard is jarrah wood?
Its density of 820 kg/m³ and hardness of 8.5 on the Janka scale provide for durable flooring. Jarrah is resilient enough to be used not just as solid timber, but also as engineered flooring, parquetry, or decking.
What wood is similar to jarrah?
Jarrah wood is very similar to that of Karri, Eucalyptus diversicolor.
Is jarrah native to Australia?
This magnificent tree can grow up to 50 m tall and is endemic to the south-west region of Western Australia. Towering forests of Jarrah can be found from the Albany region on the south coast to Gingin north of Perth.
How long does jarrah last?
25 years
You can expect a jarrah deck to last 25 years. With its rich red colour and attractive grain, jarrah is one of Australia’s most prized timbers. Often chosen for indoor use, jarrah is also a perfect decking timber.
Is Jarrah more expensive than Merbau?
The downsides of Jarrah are that it is on the more expensive side and requires a bit more maintenance and care than other decking timbers. However, many owners of Jarrah decking believe the price and extra care to be worth it for its beautiful finish and durability.
What is jarrah firewood?
Fire & Flame’s kiln-dried Jarrah is one of the world’s premium firewoods, one of a rare few Australian hardwoods that combines effectiveness with affordability. High density and consistent moisture content ensures your fire burns clean with a high heat output, minimal smoke and the unique aroma of the Australian bush.
What is a kiln dried wood?
Kiln drying is a first step in bringing all wood products to moisture content levels that will be subject to minimal moisture-related damage. What Is Kiln-Dried Wood? Kiln-dried wood is wood that has been dried in an oven (kiln).
What are the characteristics of jarrahs timber?
Durability in Ground: Durability is Jarrahs’ best feature. It is both termite and rot resistant Dimensions: Sizes up to 300mm wide and 50mm thick are rare. Kiln dried timber in sizes larger than this, apart from 75×75, are generally not available.
What is the kiln drying process?
The Kiln Drying Process. When trees are felled and brought to a lumber mill, the first step is usually to debark and sort the logs by species, size or by end use. Logs destined for wood flooring, for example, are then sawn into rough boards of the required dimensions. These are often edged or trimmed for length before they are dried.