Why is my Vax carpet cleaner not dispensing water?
Please ensure the front nozzle is clear from obstruction. Check the seals are in place on the dirty water tank and that the tank is housed correctly and securely locked into position. Ensure the emptying cap on the dirty water tank is in place. Please check there is no damage to the front nozzle or dirty water tank.
How do you clean a VAX Rapide ultimate dirty water tank?
- Pull the dirty water tank handle forward and lift the filter to remove.
- Rinse the filter under the tap to remove any dirt or debris.
- Using the handle, lift the tank off the machine.
- Twist to remove the dirty water tank cap.
How do you attach a hose to a Vax Rapide Deluxe?
Insert the hose adapter into the top of the dirty water tank. Connect the hose water supply plug into the socket on the lower left side of the cleaner. Align inserts and push in. Turn clockwise to secure.
Why won’t my carpet cleaner pick up water?
If it is not sucking up water properly, make sure the dial is set to floor cleaning. Jiggle the tank to ensure it is making a good connection to the machine. Check your filters and make sure all of the doors and latches are properly closed so that the machine can achieve a good suction.
Why is my carpet cleaner not releasing water?
It’s possible your pump may have lost its prime. To check, turn off machine and hold the spray trigger for 30 seconds. Your pump belt could be broken. To check, turn the power off and unplug from the outlet, insert a flat head screwdriver in to the slot of the belt access door to release.
Can I use VAX without water?
Do not use without the solution tank and dirty water tank in place. 14. Turn off all controls before unplugging. 15.
How do you use VAX Powermax?
Put Vax Pre-treatment Solution in the clean water tank. Plug in the wand and turn the machine on. The wand will produce a fine spray to put on the mark or stain. Leave this on your carpet for 15 minutes and then begin your full carpet wash.